The MC 355 touch weight transmitter works both as a weight indicator and as a multi-component batch batcher. It is able to manage two measuring channels with simultaneous acquisition, or alternatively, at reduced frequency and to display, during operation, the main status parameters. In addition, the MC 355 weight indicator has several options including the availability of various serial and analog outputs, as well as logic inputs and outputs and the possibility of interfacing with PC / PLC. PWS: 20/2012
Technical Specifications in PDF
| Measuring range: 7,8 mV/V bipolar |
| Input sensitivity: 0.02 µV/count |
| Full scale non-Linearity: < 0.01% |
| Gain drift: < 0.0003% FS/°C |
| Display: LCD 5.2” (visible area 118mm x 58mm) (l x h) |
| A/D Converter: 24 bit |
| Internal Resolution: 16.777.216 punti |
| Trasducer input voltage: 5 Vdc / 120 mA (max 8 cells - 350 Ohm) |
| Frequency signal acquisition: 12,5 ÷ 250 Hz |
| Degree of protection: IP65 |
| Visible resolution (in divisions): > 60000 |
| Divisions value (adjustable): 0.001 ÷ 50 |
| Temperature range: -10 ÷ +50°C |
| Storage temperature: -20 ÷ +60°C |
| Filter: 0.2 ÷ 50 Hz |
| Logic output: 6 optoisolated (clean contact) max 30 Vcc/60 mA cad |
| Logic input: 6 optoisolated 24 Vcc PNP (external excitation) |
| Additional I/O: 4 external modules 4 In/8 Out |
| Serial port: RS232, RS422, RS485 |
| Power supply: 24 Vdc ±15% 10 W |
| Regulatory compliance: EN61000-6-2, EN61000-6-3, EN61010-1 |
| Baud rate: 1200 ÷ 115200 adjustable |
| Transmission distance: 15m (RS232C), 1000m (RS422; RS485) |
| Fieldbus: Profibus DP-V1, baud rate da 9,6 K/sec a 12 Mbit/sec Ethernet TCP/IP, UDP, ARP, ICMP, Modbus/TCP |
deutsch
français
español
italiano
हिन्दी
