Industrial Electronic Weighing

MCT 1302

The MCT 1302 touch screen weight indicator is ideal for all types of weighing, in particular for static weighing and loading / unloading and multi-component dosing. It is easy to install and use and can be customized as needed. MCT 1302 has a multilingual menu, internal data memory of 64 Kbytes expandable up to 1024 Kbytes and simultaneous availability of Fieldbus and analogue output.

Further Information

Technical Specifications

Watch our tutorial

SKU: 13/2018

Technical Specifications

Serial door: 1 USB device + 1 RS232C + 1 RS485/Fieldbus
Keyboard: 4 wires resistive touch screen
Dimensions: 150x95x26mm (LxWxH) including terminal blocks; 150x95x56mm (WxHxD) with fieldbus options; drilling template: 138x82mm
Display: graphic LCD (240x128 pixel)
Divisions value (adjustable): x1, x2, x5, x10, x20, x50; 4 decimal point
Trasducer input voltage: 5 Vdc (max 8 -350 Ohm- load cells)
Electrical connection: removable screw terminal blocks (3.81mm pitch)
Linearity: < 0.01% FS
Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety, EN45501 for metrology
Temperature range: -10/+ 50°C (humidity max 85% no condensation)
Analog optional output: optoisolated 16-Bit Voltage: 0 to 5/10 V (R min10 K Ohm), Current: 0/4 to 20 mA (R max 300 Ohm)
Logic input: 6 optically isolated 24 Vdc PNP (external power supply)
Logic output: 6 opto-isolated; max 24 Vdc/100mA each
Mounting type: panel mount
Storage temperature: -20 ±+70°C
Analog output calibration: keyboard (touch screen)
Tool voltage: 18÷30 Vdc - Power consumption 5 W
Data storage: 64 Kbytes expandable up to 1024 Kbytes
Visible resolution: 999.999 displayable divisions on net weight
Microcontroller: ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard from USB
Temperature drift analog output: 0,001% FS/°C
Gain drift: < 0.001% FS/ °C
Analog output linearity: < 0,02% FS
Measuring range: -3.9 ÷ +3.9 mV/V
Frequency signal acquisition: 12 ÷ 1000 Hz
A/D Converter: 24 bit; internal resolution up to 16.000.000
FieldBUS protocol: ETHERNET 10/100 con protocolli TCP, MODUBUS/TCP, UDP, IP, ICMP, ARP; PROFINET; ETHERNET/IP; ETHERCAT
Input sensitivity: 0.02 microV min
Additional I/O: up to 4 external modules with 4 in/8-out each (16 in/32 out, total) by independent RS485
Filter: selectable 0.1÷250 Hz
Tutorial 1 / 1